Written by
Sarah Noel
Edited by
Tara Farmer
Fact-checked by
Tom Grupa
Average cobblestone pavers cost
Cobblestone pavers cost $20 to $50 per square foot installed on average or up to $75 per square foot for specialty installations. A cobblestone patio costs $4,000 to $20,000. A 2-car cobblestone driveway costs $17,300 to $28,800 installed. Cobblestone prices are $10 to $25 per square foot.
| Patio / walkway size (square feet) | Total cost installed |
|---|---|
| 50 | $1,000 –$2,500 |
| 100 | $2,000 – $5,000 |
| 150 | $3,000 –$7,500 |
| 200 | $4,000 – $10,000 |
| 250 | $5,000 –$12,500 |
| 300 | $6,000 –$15,000 |
| 350 | $7,000 –$17,500 |
| 400 | $8,000 – $20,000 |
| 500 | $10,000 –$25,000 |
| 1-car driveway (12'x24')* | $8,650 –$14,400 |
| 2-car driveway (24'x24')* | $17,300 –$28,800 |
*Fees increase from $50 to $75 per square foot with a gravel base of 8" to 12" deep.
Get free estimates from paver installers near you.
Search
Cobblestone price per square foot by type
Cobblestone prices are $10 to $25 per square foot, excluding installation. Prices vary by the type and shape. Gray granite cobblestones are the most common.
In comparison, most other brick or concrete pavers cost $2 to $4 per square foot on average for materials.
| Cobblestone type | Cost per square foot* | Size per cobblestone piece |
|---|---|---|
| Cube | $17 – $20 | 3.5" – 4.0" on all sides |
| Square thin | $16 – $18 | 4"x4" at 2" thick |
| Regulation | $16 – $17 | 5"x9" at 5" thick |
| Thin landscape | $10 – $16 | 4"x8" at 2" – 3" thick |
| Landscape | $15 – $17 | 4"x8" at 4" thick |
| Jumbo | $10 – $25 | 7"x10" at 4" thick |
*Material prices for recently quarried granite, not reclaimed or antique cobblestones.
Prices of traditional cobblestone alternatives include:
Concrete cobblestone-shaped pavers cost $4 to $5 per square foot for sizes6"x6" to 6"x9" at 2" to 3" thick.
Concrete cobblestone matted pavers cost $5 to $6 per square foot on average.
Concrete cobblestones with irregular rounded shapes cost $6 to $7 per square foot and are 2.5" to 2.75" thick.
Cobblestone paver installation cost factors
Cobblestone paver installation labor costs $10 to $25 per square foot. Additional fees to install cobblestones depend on local site conditions.
| Factor | Cost per square foot | Average total cost (200 – 400 SF) |
|---|---|---|
| Materials | $10 – $25 | $2,000 – $10,000 |
| Installation labor & supplies | $10 – $25 | $2,000 – $10,000 |
| Total installed cost | $20 – $50 | $4,000 – $20,000 |
Cost factors include:
Leveling – The cost to level or regrade a yard is $0.04 to $2.00 per square foot.
Landscaper labor – Landscaping costs $50 to $100 per hour for setting the cobblestones and all related yard work.
Patio edging – Landscape curbing costs $5 to $18 per linear foot.
Permit – A permit costs $200 to $300 for paver patios of 200 to 400 square feet.
Stone base – Gravel prices are $10 to $50 per ton. A 4" to 6" deep gravel base works for patios and walkways, but an 8" to 12" deep base is essential for driveways.
Ground fill materials – Sand costs $15 to $50 per cubic yard delivered, or $50 to $150 per ton. Installers place sand above the gravel for dry-laid cobblestones for rainwater drainage and to stabilize the stones.
Cobblestone size per piece – Higher prices of $20 to $36 per square foot apply for thicker stones cut into extra-large 0.5- to 1.0-square-foot blocks.
Antique cobblestone – Reclaimed cobblestones from historical sites cost up to double the price of normal cobblestones.
Color – Black granite cobblestones are the most expensive color. Pink and yellow granite also cost slightly more than the common gray granite.
Demolition – Removing a damaged stone patio costs $1 to $5 per square foot. Concrete removal costs $3 to $8 per square foot.
Total job size – Prices per square foot are cheaper for big jobs and increase for small jobs according to the contractor's minimum fees.
Custom stone cutting – Installing a semicircle patio or curved borders will raise labor fees since many stones need precise cutting for that design.
Weed barrier – Prices for landscape fabric materials are $0.05 to $0.25 per square foot depending on the type. Installers lay this barrier under the gravel bed to stop gravel pieces from sinking down into the ground soil.
Cobblestone patio cost
A 10'x20' cobblestone patio costs $4,000 to $10,000 or $20 to $50 per square foot installed. This price includes a well-draining base of gravel 4" to 6" deep that's ideal for most patios.
Adding outdoor lighting installation costs $80 to $300 per fixture.
A patio enclosure costs $8,000 to $30,000.
Tumbled cobblestones with a smooth and perfectly flat top are important to make a level surface for patio chairs.
| Patio size | Average total cost installed |
|---|---|
| 6'x9' | $1,100 – $2,700 |
| 10'x10' | $2,000 – $5,000 |
| 10'x20' | $4,000 – $10,000 |
| 12'x12' | $2,900 – $7,200 |
| 12'x24' | $5,750 – $14,400 |
| 15'x15' | $4,500 – $11,250 |
| 20'x20' | $8,000 – $20,000 |
| 24'x24' | $11,500 – $28,800 |
| 30'x30' | $18,000 – $45,000 |
Cobblestone driveway cost
A 2-car cobblestone driveway costs $17,300 to $28,800 or $20 to $50 per square foot installed with a 4" to 6" gravel base underneath. However, the cost of a cobblestone driveway can reach $75 per square foot with an 8" to 12" gravel base in climates with a frost line deeper underground.
Excavation and prep alone can take several days, and laying the cobblestones adds another 1 to 2 days.
Cobblestone driveways must have a level and well-compacted base to maintain a flat surface under the extra weight of vehicles.
In comparison, other driveway pavers cost $10 to $30 per square foot installed with bricks, concrete pavers, rubber pavers, or permeable-grid paving.
Cobblestone walkway cost
A 4'x20' cobblestone walkway costs $1,600 to $4,000 on average or $20 to $50 per square foot installed. This price range includes a gravel base of at least 4" below the cobblestones to allow for the necessary drainage.
In comparison, a regular stone walkway costs $16 to $35 per square foot installed.
Lower costs apply for walkways installed in compacted, sandy, or rocky soil that doesn't need as much gravel below.
| Walkway size | Square feet | Average cost installed |
|---|---|---|
| Primary / front walkway (minimum) | ||
| 20'x4' | 80 | $1,600 – $4,000 |
| 35'x4' | 140 | $2,800 – $7,000 |
| 70'x4' | 280 | $5,600 – $14,000 |
| 90'x4' | 360 | $7,200 – $18,000 |
| Primary / front walkway (comfortable) | ||
| 20'x5' | 100 | $2,000 – $5,000 |
| 35'x5' | 175 | $3,500 – $8,750 |
| 70'x5' | 350 | $7,000 – $17,500 |
| 90'x5' | 450 | $9,000 – $22,500 |
| Side path / secondary walkway | ||
| 20'x3' | 60 | $1,200 – $3,000 |
| 35'x3' | 105 | $2,100 – $5,250 |
| 70'x3' | 210 | $4,200 – $10,500 |
| 90'x3' | 270 | $5,400 – $13,500 |
Cost of cobblestone pavers vs. other types
A regular brick or concrete paver patio costs $10 to $17 per square foot installed on average—about half the cost or less of installing a cobblestone patio. The following table shows other paver material prices and installation costs:
| Paver material type | Material cost per square foot | Cost per square foot installed |
|---|---|---|
| Bluestone pavers cost | $6 – $14 | $15 – $31 |
| Granite pavers cost | $10 – $15 | $19 – $32 |
| Limestone pavers cost | $7 – $15 | $16 – $32 |
| Sandstone pavers cost | $9 – $13 | $18 – $30 |
| Brick pavers cost | $2 – $6 | $10 – $17 |
| Permeable pavers cost | $4 – $12 | $8 – $30 |
| Concrete patio costs | $2 – $6 | $5 – $15 |
| Stamped concrete cost | $2 – $6 | $8 – $19 |
| Marble | $5 – $20 | $10 – $40 |
| Slate | $9 – $25 | $18 – $42 |
| Gravel costs | $0.50 – $1.50 | $1 – $3 |
| Pea gravel costs | $0.50 – $1.50 | $0.85 – $2.80 |
Cobblestone pavers pros and cons
The following table shows the advantages and disadvantages of cobblestone pavers:
Get free estimates from paver installers near you.
Search
| Pros | Cons |
|---|---|
|
|
Cobblestone pavers FAQs
What is cobblestone?
Cobblestones are natural stones from riverbeds cut into square or rectangular shapes. Cobblestones are typically granite, basalt, bluestone, or limestone. More expensive types of cobblestones include marble and travertine. These pavers have non-slip surfaces, withstand all climates, and are the most versatile to install.
Where to buy cobblestone pavers
You can buy cobblestone pavers from:
Home improvement stores
Landscaping companies
Quarry suppliers
Stone and paver outlets online
Masonry supply outlets
Getting estimates for cobblestone pavers
Before hiring a paver installer or patio contractor, be sure to:
Compare 3 or more estimates from different cobblestone paver professionals.
Select licensed, insured, and bonded companies with 5+ years of experience.
Ask if they have certifications as an ICPI Residential Paver Technician or from a masonry association.
Read their reviews on HomeGuide and Google.
Request an estimate, contract, and warranty in writing before work starts.
Beware of the lowest bids that may be a sign of low-quality results.
Never make the last payment before the job is complete.
Questions to ask
How many cobblestone paver projects have you installed?
Can I see a portfolio of your past installations and references?
What are the price differences between the cobblestone types you offer?
How do I contact the project manager, and will you bring subcontractors?
Will you pull all permits?
Do you check for underground utility lines before digging?
What will you use for the base under the stone pavers?
Will you compact and level the base before installing paver stones?
Which cobblestones do you recommend?
What are my options for edging?
Are you familiar with building codes for patios in this area?
Does this bid include all materials, delivery fees, labor, prep work, and cleanup?
How long will this job take?
What does your warranty policy include?
How much space will you need for the crew and equipment?
What is your payment schedule?
